Polycom 1725-11530-310 ユーザーズマニュアル

3 - 1

Setting up Your System

Your SoundPoint IP / SoundStation IP SIP phone is designed to be used like a 

regular phone on a public switched telephone network (PSTN). 
This chapter provides basic instructions for setting up your SoundPoint IP / 

SoundStation IP phones. This chapter contains information on:

Because of the large number of optional installations and configurations that 

are available, this chapter focuses on one particular way that the SIP 

application and the required external systems might initially be installed and 

configured in your network. 
For more information on configuring your system, refer to 

. For more information on the configuration files required 

for setting up your system, refer to 

 on page 

For installation and maintenance of Polycom SoundPoint IP / SoundStation IP 
phones, the use of a boot server is strongly recommended. This allows for flexibility 
in installing, upgrading, maintaining, and configuring the phone. Configuration, log, 
and directory files are normally located on this server. Allowing the phone write 
access to the server is encouraged. 

The phone is designed such that, if it cannot locate a boot server when it boots up, 
it will operate with internally saved parameters. This is useful for occasions when 
the boot server is not available, but is not intended to be used for long-term 
operation of the phones.

http://www.polycom.com/usa/en/support/voice/soundpoint_ip/VoIP_Technical_Bull
etins_pub.html

 .