Polycom 1725-11530-310 ユーザーズマニュアル

Administrator’s Guide SoundPoint IP / SoundStation IP 

3 - 10

Server Address

dotted-decimal IP address
OR
domain name string
OR
URL

All addresses can be followed 
by an optional directory and 
optional file name.

The boot server to use if the DHCP client is disabled, the 
DHCP server does not send a boot server option, or the 
Boot Server parameter is set to Static. The phone can 
contact multiple IP addresses per DNS name. These 
redundant boot servers must all use the same protocol. If 
a URL is used it can include a user name and password. 
Refer to 

 on page 

. A 

directory and the master configuration file can be 
specified. 

Note: ":", "@", or "/" can be used in the user name or 
password these characters if they are correctly escaped 
using the method specified in RFC 1738. 

Server User

any string

The user name used when the phone logs into the server 
(if required) for the selected Server Type. 

Server Password

any string

The password used when the phone logs in to the server 
if required for the selected Server Type. 

File Transmit Tries

1 to 10
Default 3

The number of attempts to transfer a file. (An attempt is 
defined as trying to download the file from all IP 
addresses that map to a particular domain name.)

Retry Wait

0 to 300
Default 1

The minimum amount of time that must elapse before 
retrying a file transfer, in seconds. The time is measured 
from the start of a transfer attempt which is defined as the 
set of upload/download transactions made with the IP 
addresses that map to a given boot server's DNS host 
name. If the set of transactions in an attempt is equal to or 
greater than the Retry Wait value, then there will be no 
further delay before the next attempt is started.

For more information, refer to 

 on page 

Network

Cable/DSL,
LAN,
Dial-up

The network environment the phone is operating in.

The default value is Cable/DSL.

Tag SN to UA

Disabled, Enabled

If enabled, the phone’s serial number (MAC address) is 
included in the User-Agent header of the Microbrowser.

The default value is Disabled.

The Server User and Server Password parameters should be changed from the 
default values. Note that for insecure protocols the user chosen should have very 
few privileges on the server.