Patton electronic SmartNode 4110 Series ユーザーズマニュアル
Access control list configuration task list
265
SmartWare Software Configuration Guide
24 • Access control list configuration
Mode: Interface
Where the syntax is:
Example: Debugging access control list profiles
The following example shows how to enable debugging for incoming traffic of access control lists on interface
wan. On level 7 all debug output is shown.
wan. On level 7 all debug output is shown.
node(cfg)#context ip router
node(cfg-ip)[router]#interface wan
node(cfg-if)[wan]#debug acl in 7
node(cfg-ip)[router]#interface wan
node(cfg-if)[wan]#debug acl in 7
The following example enables the debug monitor for access control lists globally.
node#debug acl
The following example disables the debug monitor for access control lists globally.
node#no debug acl
Step
Command
Purpose
1
node(cfg)#context ip router
Selects the IP router context
2
node(ctx-ip)[router]#interface if-name
Selects IP interface if-name for which access
control list profile shall be debugged
control list profile shall be debugged
3
node(if-ip)[if-name]#debug acl {in | out} [level]
Enables access control list debug monitor
with a certain debug level for the selected
interface if-name
with a certain debug level for the selected
interface if-name
Keyword
Meaning
if-name
The name of the IP interface to which an access control list profile gets bound
level
The detail level. Level 0 disables all debug output, level 7 shows all debug output.
in
Specifies that the settings for incoming packets are to be changed.
out
Specifies that the settings for outgoing packets are to be changed.