Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Displaying SNMP related information

SmartWare Software Configuration Guide 

In the following example the NMS running on host with IP address 172.16.224.44 shall be defined as SNMP 
trap target. Since the NMS requires that SNMP message headers have a community of Not4evEryOne the secu-
rity-name argument is set accordingly.

node(cfg)#snmp target 172.16.224.44 security-name Not4evEryOne

Displaying the SNMP related configuration settings is often necessary to check configuration modifications or 
when determining the behavior of the SNMP agent.

This procedure describes how to display information and configuration settings for SNMP

Mode: Configure

Example: Displaying SNMP related information

This example shows how to display SNMP configuration information.

node(cfg)#show snmp

SNMP Information:
  hostname : node
  location : Wiring Closet, 3rd floor
  contact  : Bill Anybody, Phone 818 700 1504

 Hosts:
   172.16.224.44 security-name public

 Targets:
   172.16.224.44 security-name Not4evEryOne

 Communities:
   public access-right ro
   Not4evEryOne access-right rw

The AdventNet SNMP utilities are a set of cross-platform applications and applets for SNMP and Web-based 
network management. These utilities can be used for device, element, application and system management. 
The following tools are the most useful:

•

MibBrowser—used to view and operate on data available through a SNMP agent on a managed device 

•

TrapViewer—used to parse and view the received traps 

The AdventNet MibBrowser is a complete SNMP MibBrowser that enables the loading of MIBs, MIB brows-
ing, walking a MIB tree, searching MIBs and performing all other SNMP-related functions to users. 

Viewing and operating the data available through an SNMP agent on a managed device, e.g. a router, switch, 
hub etc., is made possible by using the MibBrowser. 

Displays information and configuration settings for SNMP