Patton electronic SmartNode 4110 Series ユーザーズマニュアル

SNTP client configuration task list

SmartWare Software Configuration Guide 

Example: Disabling the SNTP client root delay compensation

node(cfg)#no sntp-client root-delay-compensation

During set-up and operation of the SNTP client, displaying the information and status of the SNTP client is 
very useful.

This procedure describes how to display information and status of the SNTP client

Mode: Configure

Example: Showing SNTP client related information

node(cfg)#show sntp-client
-------------------------------------------
SNTP client        enabled
Operating mode     unicast
Local port         123
Primary server     172.16.1.10:123 v4
Secondary server   128.138.140.44:123 v4
Anycast address    224.0.1.1:123
Poll interval      30sec
Local clock offset disabled
GMT offset         +2:00:00
-------------------------------------------

During setup and operation, debugging the behavior of the SNTP client is very useful.

The debug sntp client is only available in superuser mode.

This procedure describes how to enable or disable debugging

Mode: Configure

node(cfg)#show sntp-client  Displays information and status of the SNTP client

node(cfg)#debug sntp client  Enables and disables SNTP debug monitor. Using the no com-

mand syntax disables this feature.