Patton electronic SmartNode 4110 Series ユーザーズマニュアル

DNS configuration task list

SmartWare Software Configuration Guide 

address. DNS Relay agents maintain a cache of host names and IP addresses, much smaller than a DNS Server. 
It acts as a liaison between the DNS Server and the DNS client

Advantages in configuring a DNS Relay in the SmartNode are:

•

Network traffic is reduced since only a single query is sent to the DNS server although numerous users may 
be requesting an IP address for the same host name

•

The DNS queries are localized between the Users and the SmartNode which reduces congestion on the 
WAN side of the SmartNode

•

Multiple DNS servers can be consulted from the SmartNode

The DNS resolver must be configured before you can use the DNS relay feature (see section 

 on page 305 to enable the DNS resolver, if you have not already done so).

Do the following to enable the DNS relay feature:

Mode: Configure

Example: Enabling DNS relay

The following example shows how to enable the DNS relay feature.

node>enable
node#configure
node(cfg)#dns-relay

If a DHCP server profile has been set up, you can announce the SmartNode 
as domain name server to the DHCP clients as follows:

node(cfg)#profile dhcp-server LAN
node(pf-dhcps)[LAN]#domain-name-server <ip-address>

Where ip-address must be the IP address of the SmartNode IP interface to 
which the DHCP clients are connected.

Enables DNS relay feature