Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Key management (IKE)

SmartWare Software Configuration Guide 

  permit 4 ip any 10.0.0.0 0.255.255.255 ipsec-policy VPN

  permit 5 ip any any

profile ipsec-transform IPSEC_3DES_192

  esp-encryption 3des-cbc 192

profile isakmp-transform ISAKMP_3DES_192

  encryption 3des-cbc 192

  authentication-algorithm sha1

profile ipsec-policy-isakmp VPN

  authentication-method pre-shared-key sdfkl@hgdslkfs/iuçkfld$gus+ghf

  mode tunnel

  peer 1.2.3.4

  diffie-hellman-group group2

  use profile ipsec-transform 1 IPSEC_3DES_192

  use profile isakmp-transform 1 ISAKMP_3DES_192

context ip

  interface WAN

  use profile acl WAN_Out out

To analyze configuration or networking problems related to IKE, the IKE module contains the following 
debug monitors which log important information about the exchanged ISAKMP messages:

•

This monitor prints every ISAKMP message sent or received as well as the current state of the ISAKMP 
main and quick modes.

•

This monitor prints information about errors detected during the ISAKMP exchange.