Patton electronic SmartNode 4110 Series ユーザーズマニュアル
FXS supplementary services description
413
SmartWare Software Configuration Guide
35 • FXS interface configuration
Conferencing
When executing a conference, all involved calls will be handed to a given call-router conference service. It is
then the responsibility of this service to initiate the conference. Conference services are configured in the Con-
text CS and are protocol specific. The sip-conference service can be used to address a SIP Media Server for con-
ferencing according to RFC4240 (see section,
then the responsibility of this service to initiate the conference. Conference services are configured in the Con-
text CS and are protocol specific. The sip-conference service can be used to address a SIP Media Server for con-
ferencing according to RFC4240 (see section,
Conferencing can only be executed if the second call was originated by the local subscriber. If the second call is
an incoming call and the local subscriber tries to conference, the call toggle service will be executed.
an incoming call and the local subscriber tries to conference, the call toggle service will be executed.
Mode: Interface FXS
Call park
The call park service allows parking an ongoing call on a specific number. This park number starts with a spe-
cific Park Code that must be configured with the 'service-pattern' command. After the user presses 'flash' to
open a new call and the dialed number starts with the defined park service-pattern, the service will be executed
five seconds after the last digit has been pressed or the user completes the number with the '#' character. This
service is not handled locally, which means that another entity must be contacted that offers it.
cific Park Code that must be configured with the 'service-pattern' command. After the user presses 'flash' to
open a new call and the dialed number starts with the defined park service-pattern, the service will be executed
five seconds after the last digit has been pressed or the user completes the number with the '#' character. This
service is not handled locally, which means that another entity must be contacted that offers it.
On some SIP servers, it is possible to park a call on a specific number by using the blind-transfer feature. This
is what the FXS park-call service achieves in an FXS/SIP call. It forces the SIP endpoint to execute a blind
transfer where the Refer-To header contains the park number.
is what the FXS park-call service achieves in an FXS/SIP call. It forces the SIP endpoint to execute a blind
transfer where the Refer-To header contains the park number.
To change the park service pattern, the already existing 'service-pattern' command has the option 'park' that
allows the user to overwrite the default setting.
allows the user to overwrite the default setting.
Mode: Interface FXS
Step
Command
Purpose
1
[name](if-fxs)[name]#[no] route confer-
ence dest-service <service-name>
ence dest-service <service-name>
Specifies the routing destination for a conference.
The no form of the command clears an existing
route.
The no form of the command clears an existing
route.
Step
Command
Purpose
1
[name](if-fxs)[name]#[no] {drop-passive |
drop-active | toggle | conference | park}
<pattern>
drop-active | toggle | conference | park}
<pattern>
Defines a new key pattern for the selected service.
The no form of the command clears the existing pat-
tern and disables the service. Use '!' for flash in a
service pattern.
The no form of the command clears the existing pat-
tern and disables the service. Use '!' for flash in a
service pattern.