Patton electronic SmartNode 4110 Series ユーザーズマニュアル

SIP interface configuration task list

SmartWare Software Configuration Guide 

Transmit Direction. For enabling sending of the Diversion Header, an outgoing address translation expres-
sion must be configured on the sip interface. This expression specifies how to create the Diversion URI of the 
header. As the User Part of the URI, the Calling Redirecting number will always be taken. The user must con-
figure the Host Part that is set per default to none. Setting the Host Part to none disables transmission of the 
Diversion Header.

Mode: Interface SIP

Receive Direction. For receiving of the Diversion Header, an incoming address translation expression must be 
configured on the sip interface. Because several methods for transmitting redirecting information are available, 
this expression specifies that they must be taken from the Diversion Header when providing them to the call 
control.

Mode: Interface SIP

Enables or disables sending of the Diversion 
Header and specifies the Host Part of the URI.

•

call: If available, the Host Part of the call-
ing from-header will be taken else the 
local ip address.

•

default-server: The ip address of the 
configured default-server will be taken.

•

domain: The configured domain name 
will be taken.

•

fix: Allows to specify a user configured 
Host Part.

•

interface: The local ip address will be 
taken.

•

none: Disables sending of the Diversion 
Header.

Enables or disables extracting of the redirec-
tion information from the Diversion Header.