Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Introduction

SmartWare Software Configuration Guide 

This chapter provides an overview of call router tables, mapping tables and call services and describes the tasks 
involved in configuring the call router in SmartWare. This chapter includes the following sections:

•

Call router configuration task list

•

Call router configuration tasks

•

Examples

There are two options for deciding where an incoming call on a CS interface is forwarded to:

•

Basic interface call routing: Basic interface routing can be configured directly on the CS interfaces. It’s also 
called direct call routing.

•

Advanced call routing: More complex call forwarding decisions can be configured in the call router.

The call router is a very efficient and flexible tool for routing calls between CS interfaces. Based on a set of 
routing criteria, the call router determines the destination (interface) for every incoming call. The forwarding 
decisions and features are based on a set of routing tables, mapping-tables and call services.

Each routing table is responsible for a specific routing criterion such as the called party number or the bearer 
capability of the call. Multiple tables can be linked together to form a decision tree. The mapping tables can be 
used to modify call properties like the calling and called party numbers according to the network requirements. 
Call services can be used in the routing path to observe the call state and spawn other calls. The hunt-group