Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Call router configuration task list

SmartWare Software Configuration Guide 

Mode: Context CS

Example: Called party number routing table

node(cfg)#context cs
node(ctx-cs)[switch]#routing-table called-e164 NATIONAL
node(rt-tab)[NATIONAL]#route 001 dest-interface USVOIP-A
node(rt-tab)[NATIONAL]#route 001320 dest-interface USVOIP-B
node(rt-tab)[NATIONAL]#route 0044 dest-interface EUROVOIP
node(rt-tab)[NATIONAL]#route 0049 dest-interface EUROVOIP
node(rt-tab)[NATIONAL]#route default dest-interface DEFACC ADD-PREFIX

The called party number (called-e164) table is used to route calls based on the called party E.164 number in 
the call set-up message. The call router scans the table to find the longest matching key starting with the first 
digit.

Regular Expressions
The key of an entry can be either a complete number or a partial number with wildcard digits, represented by a 
period (.) character. Each (.) represents a wildcard for an individual digit. For example, if the key is defined as 
888 . . . ., then any called party number beginning with 888, plus at least four additional digits matches this 
entry.

In addition to the period (.), there are several other symbols that can be used as wildcard characters in the key. 
These symbols provide additional flexibility in designing call routing and decrease the need for multiple entries 
in configuring number ranges.

node(ctx-cs)[switch]#routing-table 
table-type table-name

Create a routing table table-name of the specified table-type. 
This enters the table mode where entries can be added or 
removed. To enter a previously created table from the context 
CS mode, you may leave away the table-type.

node(rt-tab)[table-name]#route key 
dest-interface

 if-name function

or
node(rt-tab)[table-name]#route key 
dest-table

 table-name function

or
node(rt-tab)[table-name]#route key 
dest-service

 service-name function

Add an entry to the routing table for destination interface if-
name, destination table table-name or destination service 
service-name. Optionally you can specify a function (map-
ping-table or complex function) that shall be executed before 
the call is routed to the destination interface, table or service. 
The format of the key depends on the type of table. The next 
sections explain key formats for the different table types.

Repeat step 2 to add lines for additional table entries.