Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Call router configuration task list

SmartWare Software Configuration Guide 

node(rt-tab)[HOLIDAY~]#route default dest-interface IF-VOIP

To remove individual routing tables you can use the 

 form of the 

 command. Alternatively 

you can remove specific entries of a routing table by entering the routing table configuration mode and use the 

 form of the 

command. 

Procedure: To delete an entry from a routing table

Mode: Context CS

Example: Remove entries from a routing table

The running-config shows the following table:

routing-table called-e164 MY-TABLE
  route 10 dest-interface IF1
  route 11 dest-interface IF2
  route 12 dest-interface IF3
  route default dest-interface IF4

To remove the first two entries from the table enter the following commands:

node(cfg)#context cs
node(ctx-cs)[switch]#routing-table MY-TABLE
node(rt-tab)[MY-TABLE]#no route 10
node(rt-tab)[MY-TABLE]#no route 11

The resulting running-config is:

routing-table called-e164 MY-TABLE
  route 12 dest-interface IF3
  route default dest-interface IF4

Procedure: To delete an entire routing table

node(ctx-cs)[switch]#routing-table 
table-name

Enter the routing table from which you want to remove an 
entry.

You do not have to enter the type of the table when 

just entering it. The type must only be specified when creating 
a table.

node(rt-tab)[table-name]#no route key Remove the entry with the specified key.

Repeat Step 2 to remove additional entries.