Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Tone configuration task list

SmartWare Software Configuration Guide 

Procedure: To configure a tone-set profile

Mode: Configure

Example: Define the Belgian special information tone

The first line defines the first element of the tone: 330ms of 950Hz at –4dB. The second line the element that 
is played when the first element has finished: 330ms of 144Hz at –4dB, and so on. The last line defines a pause 
of 1 second after the three tones. The cadence is repeated infinitely.

node(cfg)#profile call-progress-tone belgianSpec
node(pf-callp)[belgian~]#play 330 950 -4
node(pf-callp)[belgian~]#play 330 1400 -4
node(pf-callp)[belgian~]#play 330 1800 -4
node(pf-callp)[belgian~]#pause 1000

Tones and pauses can be arbitrarily sequenced up to a number of 10 elements per call-progress-tone. The 
default call-progress-tone is an empty tone. The total number of different play elements across all configured 
call-progress-tones must not exceed 15 (an error is thrown if it does). If the call-progress-tone consists of only 
one element, this element has infinite duration. The duration parameter is ignored in this case.

A tone-set profile maps one call-progress-tone profile to each internal call-progress-tone. A tone-set profile typ-
ically includes all the call-progress-tones for one country. 

Procedure: To configure a tone-set profile

Mode: Configure

Creates a call-progress-tone profile with name 
name and enters call-progress-tone configura-
tion mode.

Defines a tone with duration duration, fre-
quency frequency1 and volume level1. If a sec-
ond frequency is defined both frequencies are 
played in parallel and for the same duration 

Defines a pause of duration milliseconds

Repeat step 2 and/or step 3 to define a tone 
sequence. Always when you enter a play or 
pause

 command, it is appended to the 

already existing tone.

Resets the tone cadence. Same as deleting 
and re-creating the tone.

Creates tone-set name and enters tone-set pro-
file configuration mode.