Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Gateway configuration task list

SmartWare Software Configuration Guide 

Mode: Gateway H.323

Example: Configuring RAS

The following example shows how to configure the registration authentication service (RAS) for a SmartNode 
in an H.323 network.

node>enable
node#configure
node(cfg)#gateway h323 h323
node(gw-h323)[h323]#gatekeeper-discovery auto
node(gw-h323)[h323]#alias h323-id Berne1
node(gw-h323)[h323]#alias e164 007
node(gw-h323)[h323]#alias e164 *5
node(gw-h323)[h323]#alias e164 19421
node(gw-h323)[h323]#supported-prefix 03198525
node(gw-h323)[h323]#ras

H.235 is an ITU-T Recommendation for security and encryption for H-series (H.323 and other H.245-based) 
multimedia terminals. It describes enhancements within the framework of the H.3xx-Series Recommendations 
to incorporate security services such as Authentication and Privacy (data encryption). 

node(gw-h323)[h323]#gatekeeper-discov-
ery auto [gkid]
or
node(gw-h323)[h323]#gatekeeper-discov-
ery manual ip-address ip-port [gkid]

Specify that gatekeeper discovery has to be 
done automatically

or
Specify the gatekeeper explicitly. You can 
repeat this command to add multiple gate-
keepers.

node(gw-h323)[h323]#alias h323-id name
or
node(gw-h323)[h323]#alias e164 number

Add an H.323_ID or E.164 alias for registra-
tion.

Repeat step 2 to add more than one alias to 
the configuration.

node(gw-h323)[h323]#supported-prefix pre-
fix

Add a gatekeeper prefix to be registered on 
the gatekeeper

Repeat step 4 to add more than one prefix to 
the configuration.

node(gw-h323)[h323]#ras

Enable the RAS protocol to make use of gate-
keepers and initiate gateway registration.