Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Configuration Examples

SmartWare Software Configuration Guide 

This is the minimal configuration of a working context sip-gateway. It has one transport interface that is bound 
to the ip address 0.0.0.0 and to the port 5060. With this configuration, the context sip-gateway processes all 
SIP requests addressed to port 5060 independent on which ip interface they arrive. 

context sip-gateway SIP-GW
  interface lan
    bind port 5060
context sip-gateway SIP-GW
  no shutdown

The following example shows a context sip-gateway that is explicitly bound to a LAN-Side and a WAN-Side ip 
interface. In this case, only SIP requests sent to ip interface 'eth0' and 'pvc100' will be processed. This could be 
a Back-To-Back User Agent application that interconnects a private SIP environment and a public SIP envi-
ronment.

context sip-gateway SIP-GW
  interface lan
    bind interface eth0 context router port 5060
  interface wan
    bind interface pvc100 context router port 5060
context sip-gateway SIP-GW
  no shutdown

If special features like Outbound Registration, Inbound Registration or Authentication is required, one or 
more location services must be configured that enables theses capabilities in general, for a group of identities or 
just for a single identity. These location services must be bound to the context sip-gateway that is responsible to 
manage the location service's domains. For detailed description about location service configuration, see Chap-
ter 50,

context sip-gateway SIP-GW
  interface lan
    bind interface eth0 context router port 5060
  interface wan
    bind interface pvc100 context router port 5060
context sip-gateway SIP-GW
  bind location-service SIP_LS_1
  no shutdown