Patton electronic SmartNode 4110 Series ユーザーズマニュアル
Applications
571
SmartWare Software Configuration Guide
46 • Context SIP gateway overview
9. Return 200 OK with all contacts registered or configured from the requested identity
If one of these steps fails the registration fails and an according message is sent. A registered contact is removed
out of the location-service after the expiration time has passed and the registration was not refreshed. The
out of the location-service after the expiration time has passed and the registration was not refreshed. The
(on page 526) in the context cs is able to forward calls to the registered contacts.
B2B User Agent with Registered Clients
The sip-location-service in the context cs is used to route calls according to the contact bindings. Calls can be
routed from other services, interfaces or tables to the sip-location-service. The sip-location-service routes the
call directly to the sip-interface over which the according contact was registered. If there are some mappings or
adjustments of call parameters needed, this has to be done before routing to the sip-location-service. The
address-translation of the destined sip interface is the only mapping that happens after the sip-location-service.
routed from other services, interfaces or tables to the sip-location-service. The sip-location-service routes the
call directly to the sip-interface over which the according contact was registered. If there are some mappings or
adjustments of call parameters needed, this has to be done before routing to the sip-location-service. The
address-translation of the destined sip interface is the only mapping that happens after the sip-location-service.
If calls from an ISDN, FXS or FXO interface are routed to the sip-location-service, it is necessary to bind a
location-service to the sip-location-service because the domain information is needed. An alternative way
would be to map a complete sip-uri to the call destination properties.
location-service to the sip-location-service because the domain information is needed. An alternative way
would be to map a complete sip-uri to the call destination properties.
The mode command in the sip-location-service configures the behavior of the service when multiple contacts
are registered for one address of record. In “distribute” mode, the call is distributed to all contacts at the same
time. The first phone that picks up receives the call. In “hunt” mode, one contact after each other is called, and
the hunt-timeout parameter defines how long to wait until proceeding to the next contact. The contacts with
higher priority are hunted first. In “distribute-and-hunt” mode, all contacts with the same priority are distrib-
uted together and the hunt searches from the higher priority contacts to the lower priority contacts. If no hunt-
timeout is configured, there is no hunting.
are registered for one address of record. In “distribute” mode, the call is distributed to all contacts at the same
time. The first phone that picks up receives the call. In “hunt” mode, one contact after each other is called, and
the hunt-timeout parameter defines how long to wait until proceeding to the next contact. The contacts with
higher priority are hunted first. In “distribute-and-hunt” mode, all contacts with the same priority are distrib-
uted together and the hunt searches from the higher priority contacts to the lower priority contacts. If no hunt-
timeout is configured, there is no hunting.
context cs switch
interface sip IF_SIP
bind context sip-gateway GW_SIP
route call dest-service SERVICE_SIP
remote inalp.com
local inalp.com
interface sip IF_SIP
bind context sip-gateway GW_SIP
route call dest-service SERVICE_SIP
remote inalp.com
local inalp.com
interface isdn IF_ISDN
route call dest-service SERVICE_SIP
route call dest-service SERVICE_SIP
service sip-location-service SERVICE_SIP
bind location-service INALP
bind location-service INALP
location-service INALP
domain inalp.com
domain inalp.com
identity-group default
registration inbound
registration inbound
context sip-gateway GW_SIP
sip-interface SIP_WAN
bind interface IF_WAN port 5060
bind interface IF_WAN port 5060
context sip-gateway GW_SIP
bind location-service INALP
bind location-service INALP