Patton electronic SmartNode 4110 Series ユーザーズマニュアル
VoIP profile configuration task list
577
SmartWare Software Configuration Guide
47 • VoIP profile configuration
Mode: Profile VoIP
Procedure: Remove a codec from the list
Mode: Profile VoIP
Procedure: Insert a codec at a specific position in the list
Step
Command
Purpose
1
node(pf-voip)[name]#codec g729 tx-
length 30 rx-length 30 silence-
suppression
length 30 rx-length 30 silence-
suppression
Appends codec g729 to the list of codecs. Speci-
fies the payload duration for transmitted RTP pack-
ets of this codec, and the maximum supported
payload duration for received RTP packets of this
codec. Allows silence suppression to be used with
this codec.
If the codec g729 already existed in the list, its
parameters are updated with the entered values.
The following codecs are available:
fies the payload duration for transmitted RTP pack-
ets of this codec, and the maximum supported
payload duration for received RTP packets of this
codec. Allows silence suppression to be used with
this codec.
If the codec g729 already existed in the list, its
parameters are updated with the entered values.
The following codecs are available:
•
g711alaw64k
•
g711ulaw64k
•
g723-5k3
•
g723-6k3
•
g726-16k
•
g726-16k-cisco
a
•
g726-24k
•
g726-24k-cisco
•
g726-32k
•
g726-32k-cisco
•
g726-40k
•
g727-16k
•
g727-24k
•
g727-32k
•
g729
•
netcoder-6k4
•
netcoder-9k6
•
transparent
•
transparent-cisco
a. Cisco does not use the standard ITU G.726 version of G.726, but the ATM AAL2 version. This build series now supports both versions of these codecs. The Cisco
G.726 codecs are available in profile voip as separate codecs with their name ending in -cisco.
Step
Command
Purpose
1
node(pf-voip)[name]#no codec g729
Remove codec g729 from the list of codecs.