Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Location Service configuration task list

616

SmartWare Software Configuration Guide

51 • Location Service

Call outbound face
The call outbound face is used to configure call properties for outgoing calls.

Mode: Identity

Mode: Call outbound

Step

Command

Purpose

[node](identity)[name]# [no] call out-
bound

Adds a new face to the identity. The no form of the
command removes an existing face with all content
in it.

Step

Command

Purpose

[node](callout)[name]# [no] use profile
(sip|tone-set|voip) <profile>

Adds or removes a profile to use if an outgoing
call destines this identity

Step

Command

Purpose

[node](callout)[name]# [no] preferred-
transport-protocol (tcp|udp)

Selects which protocol to prefer if an outgoing call
destines this identity.

Step

Command

Purpose

[node](callout)[name]# [no] traffic-class
<traffic-class>

Selects which traffic class to set if an outgoing call
destines this identity.

Step

Command

Purpose

[node](callout)#proxy <host> [<port>]
[strict-route]
or
[node](callout)#proxy <index> <host>
[<port>] [strict-route]
or
[node](callout)#proxy before <index>
<host> [<port>] [strict-route]
or
[node](callout)#proxy after <index> <host>
[<port>] [strict-route]

Adds a new proxy entry to the call outbound face.
If the from-uri of a call originating from us matches
the identity for each proxy configured there is a
route-header added. If more than one proxy entry
has to be entered, the order of the list can be mod-
ified by using the index and/or the insert key-
words before and after.