Patton electronic SmartNode 4110 Series ユーザーズマニュアル

System image handling task list

SmartWare Software Configuration Guide 

Operating configurations cannot be executed from the persistent memory, so the configuration used for oper-
ating the SmartNode is copied into the volatile memory of the SmartNode prior to normal operation. This 
procedure takes place after the system bootstrap, where the application image (i.e. SmartWare) is started and a 
configuration must be available. Shortly before SmartWare has completed all startup processes, the configura-
tion startup-config is copied from nvram: in persistent memory to the running-config configuration in system: in 
volatile memory. 

You can back up the running-config to nvram: or to a remote TFTP server with a user-defined name.

When returning to the factory-config by using the 

 command, all user-specific configurations saved in nvram: 

remain even after reload. 

Figure 8. SmartNode memory regions logically defined in SmartWare

To load and maintain system images, perform the tasks described in the following sections:

•

Displaying system image information

•

Copying system images from a network server to the Flash memory (see 

•

Copying the driver software from a network server to the Flash memory (see 

• Factory

Configuration
“factory-config”
(read-only)

• Startup

Configuration
“startup-config”

•  User specific

Configuration
“user-config”

• current Running

Configuration
“running-config”

• Configuration

Files

• Batchfiles for

System Image
download

• Application Image
• Bootloader Image
• Microcode Image

Storing the current Configuration locally

 Configuration File Upload

Storing the current Running Configuration remotely

Remote  (TFTP Server)

Image / Microcode Download

Configuration File Download

Only on Startup to execute the
Startup or Factory Configuration