Patton electronic SmartNode 4110 Series ユーザーズマニュアル

System image handling task list

SmartWare Software Configuration Guide 

After the successful download, either issue the 

 command (in order to start the IPNode with the new 

software) or restart the H.323 gateway, thus enabling calls again (with the current software):

node(gw-h323)[h323]#no shutdown

It is possible to upgrade the software directly by passing the name of the delivered zip-file to the CLI command 
“copy”. The SmartWare downloads the whole ZIP file. During this time the download progress is displayed in 
bytes.  After downloading, the ZIP file containing batch file “bw” or “b” will be extracted and executed. This 
leads to writing the SmartWare image, which is also part of the ZIP file, to the flash. The web pages are 
updated too. After writing the image to the flash, the Smartware needs to be reloaded with the command 
reload.

Mode: enable

Example: An example of such a Smartware upgrade session, where the new software is in the file 
SN1000_SIP_R3.T_2006-08-10.zip which is stored on a tftp-server with the ip address 192.186.22.44:

node#copy tftp://192.186.22.44/SN1000_SIP_R3.T_2006-08-10.zip flash:
Download...   3124510 Bytes
Downloading image...completed (2715796 bytes)
Erasing flash...completed.
Writing to flash...completed
Processing files...completed
node#reload

Downloads the specified delivery file from 
the TFTP server and starts the driver soft-
ware image upgrade process.