Patton electronic SmartNode 4110 Series ユーザーズマニュアル
Configuration file handling task list
81
SmartWare Software Configuration Guide
6 • Configuration file handling
You can copy the current running configuration into the persistent memory region nvram: under a user-speci-
fied name, if you want to preserve that configuration.
fied name, if you want to preserve that configuration.
In addition, an already existing configuration is usually copied into the persistent memory region nvram: by
using a user-specified name, for conservation or later activation.
using a user-specified name, for conservation or later activation.
As shown in
the local memory regions are identified by their unique names, like nvram:, which is
located in flash memory, and system:, which is the system RAM, i.e. the volatile memory. As already men-
tioned, configuration files in the same memory region need a unique name. For example, it is not possible to
have two configuration files with the name running-config in the memory region nvram:.
tioned, configuration files in the same memory region need a unique name. For example, it is not possible to
have two configuration files with the name running-config in the memory region nvram:.
As you might expect, the
copy
command does not move but replicates a selected source to a target configura-
tion file in the specified memory region. Therefore the source configuration file is not lost after the copy pro-
cess. There are three predefined configuration file names for which it is optional to specify the memory region,
namely factory-config, startup-config and running-config.
cess. There are three predefined configuration file names for which it is optional to specify the memory region,
namely factory-config, startup-config and running-config.
Mode: Administrator execution
Example: Backing up the startup configuration
The following example shows how to make a backup copy of the startup configuration. It is copied under the
name backup into the flash memory region nvram:.
name backup into the flash memory region nvram:.
node#copy startup-config nvram:backup
Replacing the startup configuration with a configuration from Flash memory
It is possible to replace the startup configuration by a configuration that is already present in the flash memory.
You can do so by copying it to the area of the flash memory where the startup configuration is stored.
You can do so by copying it to the area of the flash memory where the startup configuration is stored.
Mode: Administrator execution
Note
The configuration backup can be a previously backed up configuration or
previously downloaded from a TFTP server.
previously downloaded from a TFTP server.
Step
Command
Purpose
1
node#copy {factory-config | startup-
config | running-config | nvram: source-
name } nvram:target-name
config | running-config | nvram: source-
name } nvram:target-name
Copies the selected source configuration file
source-name as target configuration file target-
name into the local memory.
source-name as target configuration file target-
name into the local memory.
Step
Command
Purpose
1
node# copy nvram:backup startup-config
Replaces the existing persistent startup con-
figuration with the startup configuration
backup already present in flash memory.
figuration with the startup configuration
backup already present in flash memory.