Polycom 1725-16829-001 ユーザーズマニュアル

Changing Power Saving Settings 

Customizing the Phone Display

Polycom, Inc. 

135

You can specify how sensitive the camera should be at detecting motion. If the 

camera detects motion (for example, if you’re near the phone), your phone will 

not initiate power-saving mode, even if an idle timeout has been reached.
If the camera detects motion, power-saving mode will terminate and the idle 

screen will display. If the camera sensitivity is high (five or higher), the phone 

will display the idle screen when you’re near the phone. If the camera 

sensitivity is low (between one and four), you will have to wave your hand at 

the camera for the idle screen to display. By default, camera sensitivity is set 

higher during office hours. If you want, you can disable the user detection 

feature altogether.

Tap  

> 

Settings > Basic > Power Saving > User Detection.

From the User Detection screen, do the following: 
— For the Office Hours Sensitivity field, enter how sensitive you want 

the camera to be while you’re in your office.
You can enter a number between 0 (no sensitivity) and 10 (high 

sensitivity). The default sensitivity is 7.
If you set a sensitivity between 1 and 4, you will have to wave your 

hand at the camera to exit power-saving mode. As well, 

power-saving mode may be initiated when you’re in your office, but 

not close to your phone. (If you enter 0, the user detection feature is 

disabled and you will have to press a key on your phone to exit 

power-saving mode.)

— Tap Off Hours Sensitivity, and then enter how sensitive you want the 

camera to be while you’re not in the office.
You can enter a number between 0 (no sensitivity) and 10 (high 

sensitivity). The default sensitivity is 2.
If you set a sensitivity between 1 and 4, you will have to wave your 

hand at the camera to exit power-saving mode. As well, 

power-saving mode may be initiated when you’re in your office, but 

not close to your phone. (If you enter 0, the user detection feature is 

disabled and you will have to press a key on your phone to exit 

power-saving mode.)

Tap the Save soft key.

Note

The camera will detect any source of motion in front of it, not just a person or people 
nearby. For example, the camera will detect flying objects or rapidly-changing light 
conditions. Therefore, even if you’re away from the phone, your phone may detect 
other sources of motion, and won’t initiate power-saving mode.

In addition, since your phone’s camera detects motion, if you close the camera 
shutter, point the camera at the ceiling, or set the camera sensitivity to 0, the phone 
will not detect your presence (even if you’re nearby).