Polycom P001 ユーザーズマニュアル

User’s Guide for the Polycom RealPresence Group Series

10

Polycom, Inc.

You can use the remote control to select and adjust the main camera or other 

near-end or far-end video sources, such as document cameras or computers. 

You may be able to adjust other auxiliary cameras or far-end cameras that 

support pan, tilt, and zoom movement. You can adjust the far-end camera only 

if it is configured at the far end to allow you to control it.
When you are in camera control mode, you can press and hold a number to 

save a preset. For more information about presets, see 

.

To select a near-end or far-end camera, or other video source:
Out of a call:
• Using your remote control, go to 

 > Cameras > Select Camera. Then 

select the camera or other video source you want to use from the list.

• Select  

> Cameras. Then select Your Cameras for near-end control or 

Their Cameras for far-end control.

• To switch between Your Cameras and Their Cameras without accessing 

the menu, press Select on the remote control while in a call.

To return to a previous screen after adjusting your or their camera settings, 
select .

Select either a near-end or far-end video source to control. During a 

multipoint call being hosted by a system in the call, you can only adjust a 

camera at the far end that has a current speaker.

2 Press the navigation buttons on the remote control to move the camera 

up, down, left, or right.

On the remote control, press 

 to zoom out or 

 to zoom in.

If you are using an EagleEye Director and camera tracking is on, you must turn 

camera tracking off before adjusting the camera.