ZyXEL Communications FMG3025-D10A ユーザーズマニュアル

 Chapter 5 Broadband

FMG3024-D10A / FMG3025-D10A Series User’s Guide

The following section contains additional technical information about the Device features described 
in this chapter.

Be sure to use the encapsulation method required by your ISP. The Device can work in bridge mode 
or routing mode. When the Device is in routing mode, it supports the following methods.

IP over Ethernet (IPoE) is an alternative to PPPoE. IP packets are being delivered across an 
Ethernet network, without using PPP encapsulation. They are routed between the Ethernet interface 
and the WAN interface and then formatted so that they can be understood in a bridged 
environment. For instance, it encapsulates routed Ethernet frames into bridged Ethernet cells. 

Point-to-Point Protocol over Ethernet (PPPoE) provides access control and billing functionality in a 
manner similar to dial-up services using PPP. PPPoE is an IETF standard (RFC 2516) specifying how 
a personal computer (PC) interacts with a broadband modem (DSL, cable, wireless, etc.) 
connection. 

 Connection

Select Nailed-UP if you do not want the connection to time out.

Select On-Demand if  you do not want the connection up all the time and 
specify an idle time-out in the Max Idle Timeout field.

Max Idle Timeout 

This value specifies the time in minutes that elapses before the Device 
automatically disconnects from the ISP.

Obtain an IP 
Address 
Automatically

Select this option If your ISP did not assign you a fixed IP address. 

Use the following 
static IP address

Select this option If the ISP assigned a fixed IP address. 

IP Address

Enter your WAN IP address in this field if you selected Use the following 
static IP address. 

Obtain DNS info 
dynamically  

Select this to have the Device get the DNS server addresses from the ISP 
automatically. 

Use the following 
static DNS IP 
address

Select this to have the Device use the DNS server addresses you configure 
manually.

Primary DNS server Enter the first DNS server address assigned by the ISP.

Secondary DNS 
server

Enter the second DNS server address assigned by the ISP.

Apply

Click Apply to save your changes back to the Device.

Cancel

Click Cancel to return to the previous configuration.

Broadband > 3G Backup (continued)