ZyXEL Communications EMG5324-D10A ユーザーズマニュアル

 Chapter 6 Wireless

EMG5324-D10A User’s Guide

Use this screen to configure WiFi Protected Setup (WPS) on your Device.

WPS allows you to quickly set up a wireless network with strong security, without having to 
configure security settings manually. Set up each WPS connection between two devices. Both 
devices must support WPS. See 

 for more information about WPS.

Note: The Device applies the security settings of the SSID1 profile (see 

). If you want to use the WPS feature, make sure you have set the security 

mode of SSID1 to WPA-PSK, WPA2-PSK or No Security.

Wireless 
Network Name 
(SSID)

The SSID (Service Set IDentity) identifies the service set with which a wireless device is 
associated. Wireless devices associating to the access point (AP) must have the same SSID. 

Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN. 

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station cannot 
obtain the SSID through scanning using a site survey tool.

BSSID

This shows the MAC address of the wireless interface on the Device when wireless LAN is 
enabled.

Security Level

Security Mode

Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on this 
wireless network. The wireless clients which want to associate to this network must have 
same wireless security settings as the Device. After you select to use a security, additional 
options appears in this screen. 

Or you can select No Security to allow any client to associate this network without any 
data encryption or authentication.

See 

 for more details about this field.

Apply

Click Apply to save your changes.

Back

Click Back to exit this screen without saving.

Wireless > More AP: Edit (continued)