ZyXEL Communications EMG5324-D10A ユーザーズマニュアル
Chapter 5 Broadband
EMG5324-D10A User’s Guide
89
5.3 The 3G Backup Screen
Use this screen to configure your 3G settings. Click Broadband > 3G Backup.
Note: The actual data rate you obtain varies depending the 3G card you use, the signal
strength to the service provider’s base station, and so on.
If the signal strength of a 3G network is too low, the 3G card may switch to an available 2.5G or
2.75G network. Refer to
2.75G network. Refer to
for a comparison between 2G, 2.5G, 2.75G and 3G
wireless technologies.
Figure 18
Network Setting > Broadband > 3G Backup
Enable VLAN
Select this to add the VLAN Tag (specified below) to the outgoing traffic through this
connection.
connection.
Enter 802.1P
Priority
Priority
IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer frame
that contains bits to define class of service.
that contains bits to define class of service.
Type the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection.
The greater the number, the higher the priority level.
The greater the number, the higher the priority level.
Enter 802.1Q
VLAN ID
VLAN ID
Type the VLAN ID number (from 1 to 4094) for traffic through this connection.
Apply
Click Apply to save your changes.
Back
Click Back to return to the previous screen.
Table 7
Broadband Add/Edit: Bridge (continued)
LABEL
DESCRIPTION