ZyXEL Communications EMG5324-D10A ユーザーズマニュアル

 Chapter 6 Wireless

EMG5324-D10A User’s Guide

Before you start using these screens, ask yourself the following questions. See 

 if some of the terms used here do not make sense to you.

• What wireless standards do the other wireless devices support (IEEE 802.11g, for example)? 

What is the most appropriate standard to use?

• What security options do the other wireless devices support (WPA-PSK, for example)? What is 

the best one to use?

• Do the other wireless devices support WPS (Wi-Fi Protected Setup)? If so, you can set up a well-

secured network very easily. 
Even if some of your devices support WPS and some do not, you can use WPS to set up your 
network and then add the non-WPS devices manually, although this is somewhat more 
complicated to do.

• What advanced options do you want to configure, if any? If you want to configure advanced 

options, ensure that you know precisely what you want to do. If you do not want to configure 
advanced options, leave them alone.

Use this screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.

Note: If you are configuring the Device from a computer connected to the wireless LAN 

and you change the Device’s SSID or security settings, you will lose your wireless 

connection when you press Apply to confirm. You must then change the wireless 

settings of your computer to match the Device’s new settings.

Click Network Setting > Wireless to open the General screen. Select the Enable Wireless LAN 
checkbox to show the Wireless configurations.

Network Setting > Wireless > General