Tatung 100 ユーザーズマニュアル

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

23

 

 

 

This command displays the system information and configuration.   

1. -print: display system overall information and configuration. 

2. -plan: It is for setting dial numbering plan. While e164 number is three digits, the plan 

should be set as 3 or 0. The plan 0 is for any positive digits use. 

3. –callalive: Enable or disable auto-disconnection after 10 seconds not receiving packets from 

remote party(sysconf –callalive 0/1, 0 for disable and 1 for enable) 

4.-keypad:set DTMF type .User can select DTMF type IP Phone receive and 

transmit.(sysconf –keypad 0/1/2/3 , 0 for inband ,1 for H.245 alphanumeric, 2 for H.245 

signal type, 3 for Q.931 user info, 4 for RFC2833.) 

5.-idto:set the duration(in second) of two pressed digits in dial mode as timed out. If after the 

duration user hasn’t pressed next number, IP Phone will dial out all number pressed. 

6.-eod:select end of dialing key, e.g set end of dial key as OK button , after finished pressing 

dialing number then press OK will dial out. (sysconf –eod 0/1/2/3 , 0 for no end of dial key , 

1 for “OK” button , 2 for “#” button , 3 for “＊” button ) 

7.-h450:Enable or disable H.450 related features, which include transfer, hold and forward.