Shiro SB2182 ユーザーズマニュアル
SB2182 User Guide
3
1. SWITCH OPERATION
RINGER switch
You can set the ringer HI/LO volume using the switch.
PULSE/TONE switch
You can set the PULSE/TONE dial mode using the switch.
2. FUNCTION KEY OPERATION
FLASH key (600ms)
In the on-hook mode, press this key to auto-hang up for 600ms, after that you can press
REDIAL or R key or dial out another number.
REDIAL or R key or dial out another number.
MUTE key
While you are on the line, if you do not want the remote party to hear you, just press and
hold the MUTE key.
hold the MUTE key.
RESET key
In the on-hook mode, press this key to auto-hang up.
R and REDIAL key
In the handset off-hook mode, press this key to redial the last dialed number.
PAUSE key
In the handset off-hook mode, press the PABX external line key, e.g. “9” follow by this key to
include a 3 seconds pause before dialing subsequent numbers.
include a 3 seconds pause before dialing subsequent numbers.
P-T key
You can set the pulse dial mode to tone dial mode by pressing this key.
3. ADDITIONAL NOTES
RING/INCOMING CALL LED INDICATOR
When there is incoming call, the LED will blink.
TROUBLESHOOTING GUIDE
(Q) I do not hear any dial tone from the handset.
(A) Ensure the handset cord is connected correctly to the handset cord jack at the base.
Ensure you have plug in the telephone cable from the telephone to the wall socket correctly.
If the problem persists, please check with your local dealer.
(A) Ensure the handset cord is connected correctly to the handset cord jack at the base.
Ensure you have plug in the telephone cable from the telephone to the wall socket correctly.
If the problem persists, please check with your local dealer.