Toshiba IPT ユーザーズマニュアル

The Direct Station Selection (DSS) console 
operates alongside of a digital telephone to 
provide 60 additional buttons. The 3000-
series telephone requires a 3000-series DSS; 
the 2000-series telephone requires a 2000-
series DSS. A DDSS3060 example is shown 
right. The DDSS2060 (not shown) looks 
similar and has the same button/LED 
functions.

The IPT1020-SD does not support a 
DSS console.

The 60 flexible feature buttons can be 
assigned as CO line, extension, DSS, One 
Touch Speed Dial or any other flexible 
feature. 

The DDSS3060 console uses dual red and 
green LEDs to show call and feature status.

Button numbers in the above figure are examples only.

DSS buttons can appear on both the DADM and DSS Console. Each DSS button is 
associated with a particular station in your telephone system. DSS buttons can transfer 
an outside call to the associated station or make a direct call to the associated station. 

The DSS LED lights steady red when the station associated with the DSS button is 
ringing, busy on a call, or when the associated station is idle, but all appearances of the 
station’s extensions are busy or in-use by other stations. When the associated DSS 
button is in the Do Not Disturb mode, the LED blinks red at a slow rate.

DSS buttons cannot call station Phantom extension numbers, Distributed Hunt Group 
Directory Numbers, or ACD Groups. DSS buttons may be configured as One Touch 
Buttons that may be programmed to call these destinations.

The LED colors described in this section apply to the DADM3020 and DDSS3060. 
Described Flash conditions apply to all DSS console models and the DADM.