Adtran 624 ユーザーズマニュアル

Total Access 600 Series System Manual

Section 6  ADTRAN Utilities

61200624L1-1B

© 2004 ADTRAN, Inc.

245

Click on 

 to open the Telnet session.

Opens dialog box for setting 

 and 

 parameters for a Telnet session. Also lets 

you 

, 

 entry, and 

 

stored entries. When the parameters are set, click 

 to make the connection. Click 

 

to end the session.

Accepts and stores host names. You may enter either a name, an IP address, or a domain name directly 
from this field. Click on the drop-down arrow to display a complete list of previously stored host 
names. 

Provides several port options. You may enter port numbers directly into this field to connect to 
non-standard ports or select the drop-down combo-box to display the following options:

Changes either the unit name or the IP address of each host. 
Press either 

 or a 

 (

) after each number in 

the IP address to move to the next field. If you press 

or enter a period while the cursor is located in an IP field, 
that field entry is deleted. 

Prompts you for the same information as the 

 

dialog box for new host. When enabled, the 

 

(Domain Name Server) feature allows users to 

request 

 via a DNS server on the network, rather than specifying an IP address. The 

name then appears in the 

 field.

Removes a host name from the list; select the host name you want to remove, and, at the prompt, click 

.

Establishes the Telnet session.

establishes a Telnet session

provides a loopback for troubleshooting

bit bucket; discards data

returns the time

displays as a unique character stream; used for self-tests