ColorVision c2630D ユーザーズマニュアル

The state that the copier enters at the end of warm-up or when the [Reset] key is pressed is called the “initial mode”. The modes, functions and 
other settings that are automatically pre-set for the initial mode are called “default settings”. These default settings are separated into two 
categories: “Copy defaults” and “Machine defaults” and can be changed as desired to suit your copying needs.

The following table indicates the machine default settings available in this copier. Change any or all of the settings as desired in order to make 
the most effective use of your copier.

Auto 
drawer[cassette] 
switching ON/OFF

If the paper in one drawer[cassette] runs out during copying, 
the automatic drawer[cassette] switching function will 
switch paper feed from the empty drawer[cassette] to 
another drawer[cassette] that contains the same size of 
paper in the same orientation for uninterrupted copying. To 
enable this function, it is necessary to turn the related 
setting “On”.

On / Off

On

In order to prevent a drawer[cassette] that holds a different 
type of paper from being switched to when the automatic 
drawer[cassette] switching function is turned ON, it is 
necessary to select “Feed same paper type” as well.

All types of paper / 
Feed same paper 
type

All types of paper

Paper size 
(drawer[cassette] 
No.1 - No.4)

Sets the size of paper that is loaded in drawers[cassettes] 
No.1 through No.4.
If you want the size to be detected automatically, select 
“Auto Detection” (Automatic size detection). If you want to 
manually set the size of paper, select “Standard sizes”.
* The setting for drawer [cassette] No.1 is not available on 

duplex copiers because the Duplex Unit is installed in its 
place.

* This setting is only available when the optional Paper 

Feeder is installed on your copier.

Auto Detection / 
Standard sizes

Auto Detection

When “Auto” is selected
Select “Centimeter” or “Inch”. 

Centimeter 
Inch

Centimeter

<If you select “Standard sizes”>
You can then select the paper size.

A3
A4
A4R
A5R
B4
B5
B5R
Folio
11" × 17"
8

1/2

" × 14"

11" × 8

1/2

"

8

1/2

" × 11"

5

1/2

" × 8

1/2

"

8

1/2

" × 13"

– – –

Paper type 
(drawer[cassette] 
No.1 - No.4)

Sets the paper type for drawers [cassettes] No. 1 through No. 
4. 
* The setting for drawer[cassette] No.1 will not be available 

on duplex copiers because the Duplex Unit is installed in 
its place.

* The setting for drawer[cassette] No.2 through No.4 will 

only be available when the optional Paper Feeder is 
installed on your copier.

* When an optional Document Finisher is installed, be sure 

to configure this setting to match the paper weight. An 
incorrect setting can cause paper jams. 

Plain
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Bond
High quality
Rough
Custom 1 – Custom 8

Plain