ColorVision c2630D ユーザーズマニュアル

Press this key when you want to use the fax priority printout 
function. The lamp in that key will light when fax priority 
printout is selected. The optional Fax Kit must be installed in 
your copier in order to use this mode. Refer to the Operation 
Guide for the optional Fax Kit for more detailed information.

Press this key when you want to use the printer priority 
printout function. The lamp in that key will light when printer 
priority printout is selected. The optional Printer Kit must be 
installed in your copier in order to use this mode. Refer to the 
Operation Guide for the optional Printer Kit for more detailed 
information.

Press this key when you want to make monochrome [B/W] 
copies. (See page 4-1.)

Press this key when you want to make full color copies. (See 
page 4-1.)

Press this key when you want the copier to automatically 
make full color copies from color originals, and black and 
white copies from monochrome [B/W] originals. (See page 4-1.)

In the default settings prepared at the factory, paper of the same 
size as the original is selected automatically and the copy 
magnification ratio is set to “100%” [1:1] (under the auto paper 
selection mode), the number of copies to be made is set to “1” and 
the image quality is set to the text&photo mode.

• The default settings for the initial mode can be changed 

using the corresponding “copy default settings” 
procedure.

• It is possible for you to change the default setting for 

the copy exposure in the initial mode from the “manual 
exposure mode” to the “auto exposure mode”. (See 
“Exposure mode” on page 7-70.)

Once a designated amount of time has passed after copying stops 
(between 10 and 270 seconds), the auto clear function will 
automatically engage and the copier will return to the same 
settings as those after warm up (initial mode settings). (However, 
the copy exposure mode and the image quality mode will not 
change.) Copies can continually be made using the same settings 
(copy mode, number of copies and exposure mode) if the next batch 
of copying is started before the auto clear function engages.

If two drawers[cassettes] contain the same size of paper in the 
same orientation and the paper in one drawer[cassette] runs out 
during copying, the automatic drawer[cassette] switching function 
will switch paper feed from the empty drawer[cassette] to the other 
drawer[cassette] that still contains paper.
It is also possible to designate which drawers[cassettes] will hold 
the same size and type of paper for automatic switching.

The automatic drawer[cassette] switching function can be 
turned OFF. (See “Auto drawer[cassette] switching 
ON/OFF” on page 7-46.)