Lucent Technologies 108355140 ユーザーズマニュアル
5
Creating a Message
To send a message to one or more subscribers:
1. Log in to your mailbox.
1. Log in to your mailbox.
The Voice Mail Activity Menu plays.
2. Press
1 to create a message.
The prompt says,
“After recording, press 1. Record at the
tone.”
3. Record your message and press
1 to end recording.
4. When you are done recording, do one of the following or go to Step 5:
■
Press
21 to re-record your message. Return to Step 3.
■
Press
23 to play back your message. Repeat Step 4.
■
Press
*3 to delete your message. Go to Step 2.
5. Press
*# to approve the message.
The prompt says,
“Approved. Enter mailbox number followed
by a # or to enter a group list, press *5. When fin-
ished addressing, press *#.”
6. Do one of the following:
■
Enter an extension number followed by
# to address the message to
an individual mailbox.
■
Press
*5. When the system prompts you to do so, enter a Group List
Number followed by
# to address the message to all the mailboxes in
the list.
NOTE:
You may enter a combination of individual extension numbers and
Personal Group Lists. You can also press
*3 to delete the last
extension number or Personal Group List you entered.
7. Repeat Step 6 to address the message to additional mailboxes.
8. When finished addressing the message, press
8. When finished addressing the message, press
*# to send the message.