Mitel 5360 ユーザーズマニュアル

Page 86

Mitel

®

 5360 IP Phone User Guide – Issue 2, February 2011

There are two LEDs associated with the cordless headset:



Blue – Indicates the operational status of the headset



Green – Indicates the status of the electrical charge of the battery

The handset is blinking, when the LED is on and off for an equal amount of time. The handset is 
winking, when the LED is on for a short period of time and off for a longer period of time. 

The Cordless Devices Application provides access to module information and pairing for 
handset or headsets.



Press 

 (Applications), and then press Cordless Devices.



Press a feature button (key) you have programmed as the Cordless Devices Application 
key.

For information about programming feature keys, see 

You can use the Cordless Module Application to view protocol, firmware, and hardware 
information about the module.

1. Press   

(Applications), and then press Cordless Devices.

2. Press 

Cordless Module Info. Device information appears on the screen.

3. Press 

Close to exit.

Blue (on 
headset)

Solid

Headset microphone is muted.

Blinking

Headset is in pairing mode.

Winking

Active audio path between Headset and 
Module.

Solid for 2 seconds

Indicates one of the following:



Pairing successful



New battery installed

Green (on 
cradle)

Solid

Battery is fully charged.

Blinking

Battery is charging.

Winking

Indicates low voltage when headset is 
uncradled.

Off

When headset is cradled, indicates battery is 
not charging.

When the pairing button on the Cordless Module is pressed, or when the battery 
level of a cordless accessory is critically low, the IP phone will automatically open 
the Cordless Devices Application.