Panasonic KX-TG6502 ユーザーズマニュアル

• You can stop registration by pressing [OFF] on the handset and pressing 

[LOCATOR/INTERCOM/TRANSFER] on the base unit.

• If “Wrong handset Refer to manual” is displayed, the handset you tried to 

register is not for this base unit. This handset is for KX-TG5200/KX-TG5202/
KX-TG5210/KX-TG5212/KX-TG5230/KX-TG5240/KX-TG5243/KX-FPG391 base 
unit. The accessory handset for this base unit is KX-TGA650. To order, see 
page 3.

If you have canceled handset registration at a previous base unit (p. 90), start 
from step 5. 

Handset: Press [MENU].

Handset: Scroll to “Initial setting” by 

pressing [d] or [B], then press the soft key 
(

).

Handset: Scroll to “Registration” by 

pressing [d] or [B], then press the soft key 
(

).

Handset: Press the soft key (

) at “HS 

registration”.

Base unit: 
Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds.

• The CHARGE indicator flashes. After the CHARGE indicator starts flashing, 

the rest of the procedure must be completed within 1 minute.

Handset:
(1) Press the soft key (

).

(2) Wait until a long beep sounds and the 

display shows the new extension number 
(ex. extension number 2).

• Registration is complete.

If you have not canceled the handset’s registration at the previous base unit 
(p. 90), the handset number remains in that base unit’s memory. To erase the 
handset number from the previous base unit, perform the following steps: 
(1) Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds, and (2) 
Press and hold the handset number [1]

  ( )  to 

  ( )

 that you do not want for 5 

seconds. A long beep sounds, then the handset number is erased from the base 
unit memory.

Initial setting

Registration

HS registration

Press LOCATOR 

on base unit 

for 3 sec.

Then press OK

 

 

 SPIPRIVACY

1

Handset [2]

   Registered

[2]

TG6500.book  Page 91  Friday, June 25, 2004  6:56 PM