Polycom 1500 C ユーザーズマニュアル

Changing When and How Video Displays 

Customizing the Phone Display

Polycom, Inc. 

125

You can change the clarity of near-site video, including the brightness, 

contrast, and sharpness levels of the video image. These settings affect how 

near-site video displays on your phone and on other phones.

Tap  

> 

Settings > Basic > Video > Camera Settings.

From the Camera Settings screen, tap, and then adjust, the following 

camera settings:

— Target Frame Rate—sets how smooth near-site video displays.

Press and drag the slider, or tap the Up or Down soft keys, to set the 

rate. Then, tap the Save soft key.
You can set a rate between 5 (least smooth) and 30 (most smooth). 

The default rate is 25.

— Brightness Level—sets how bright near-site video will be.

Press and drag the slider, or tap the Up or Down soft keys, to set the 

level. Then, tap the Save soft key.
You can set a level between 0 (dimmest) and 6 (brightest). The default 

level is 3.

— Saturation Level—sets how much color near-site video displays. 

Press and drag the slider, or tap the Up or Down soft keys, to set the 

level. Then, tap the Save soft key.
You can set a level between 0 (lowest) and 6 (highest). The default 

level is 3.

Note

Changes you make will apply to the next call.

Note

If you place your phone so that the camera faces a bright light source (for example, 
a bright window), you may need to increase the camera’s brightness, contrast, and 
sharpness levels so the far site can see you better. To see how you will look to the 
far site, view the PIP.

Note

If your camera points to a bright light source, increase the brightness, contrast, and 
sharpness levels so the near site will be more clear.