Philips 215 ユーザーズマニュアル
15
Troubleshooting
Telephone troubleshooting.....
P R O B L E M S
C A U S E S
SOLUTIONS
- No dialling tone when
pressing .
- The base station is not properly
connected to electricity or to the
telephone sockets.
- Too far from the base station
- Battery pack is low (low battery icon
is displayed).
connected to electricity or to the
telephone sockets.
- Too far from the base station
- Battery pack is low (low battery icon
is displayed).
- Check the connections.(inside
cover).
cover).
- Move closer to the base
- Charge battery pack. (inside
cover).
- Charge battery pack. (inside
cover).
-
icon is blinking.
- The handset is not registered.
- The handset is out of range.
- When the handset is placed
on the charging unit, no beep is
heard.
on the charging unit, no beep is
heard.
- The handset is not placed correctly
on the base station charging unit.
- Charging contacts are dirty.
on the base station charging unit.
- Charging contacts are dirty.
- Take the handset off the base
station and put it back again.
- Clean them with a clean and dry
cloth.
station and put it back again.
- Clean them with a clean and dry
cloth.
- Battery icon remains empty
although the handset has
charged for 24 hours.
although the handset has
charged for 24 hours.
Handset battery pack is defective.
Please contact your PHILIPS
dealer in order to purchase new
rechargeable battery pack.
dealer in order to purchase new
rechargeable battery pack.
- No symbol on the display.
- Battery pack is uncharged.
- The product is not properly connected
- The product is not properly connected
Charge battery pack. (inside cover).
Make sure your product is plugged
in. (inside cover).
Make sure your product is plugged
in. (inside cover).
- A phonebook entry has not
been memorised.
been memorised.
The phonebook you wish to use is full. Delete some entries to free
memory space.
- Bad audio quality (crackles,
muted, echo, etc.).
muted, echo, etc.).
- Interference from nearby electrical
appliance.
- Base station installed in a room with
thick walls.
- You are using the handset too far
from the base station.
appliance.
- Base station installed in a room with
thick walls.
- You are using the handset too far
from the base station.
- Try to plug the base station in
elsewhere.
- Install the base station in a
elsewhere.
- Install the base station in a
different room.
- Move closer to the base station.
- Move closer to the base station.
- Caller display does not work. Service not activated, wrong operator
or wrong setting.
Check your subscription with your
operator.
operator.
z
Please read this user guide carefully before calling your Philips
Customer Care Center.
z
z
IF NEEDED, check that the appropriate country code is set in the
phone :
: Short .
:Long.
Changing recall type (flash setting)
The use of some services accessed with
(call waiting, call forward...) will
depend on the flash setting (Short/Long) according to your installation type (Public,
PABX). (country dependent)
PABX). (country dependent)
or
to choose between Short or Long
www.philips.com/support
DECT 215 master UK indice 1.qxd 30/08/2004 15:44 Page 15