Nokia 9356900 issue 1 ユーザーズマニュアル
19
List of AT Commands for Nokia 22
Copyright © Nokia Mobile Phones 2001. All rights reserved.
5.1.6 +GMR Request TA revision identification
Command
Response
Execute
+GMR
SWx.xx
5.1.7 +GSN Request TA serial number identification
Command
Response
Execute
+GSN
IMEI
5.1.8 +GCAP Request complete capabilities list
Command
Response
Execute
+GCAP
+GCAP: +CGSM, +FCLASS, +DS +ES
Defined values
+CGSM This is not a command to be used, but it refers to the support of the GSM 07.07 AT
command set. The implementation is according to GSM 07.07 section 5.7.
+FCLASS A command to query the support of different facsimile classes
+DS Data Compression
command set. The implementation is according to GSM 07.07 section 5.7.
+FCLASS A command to query the support of different facsimile classes
+DS Data Compression
5.2 De
facto
5.2.1 &V View configuration
Command
Description
Execute
&V
Show current and stored profile settings (all command parameter values defined
under &F plus &Y setting)
under &F plus &Y setting)
5.2.1.1 &W
Store
configuration
Command
Description
Execute
&W[0]
Store to profile 0
&W1
Store to profile 1
The &W command stores the current parameter values in the given profile. The command
parameters that are stored in a profile are the same as those listed under the &F command, except
for the parameters of the following commands that are not stored: +CMOD, +CSCA, +CSMP.
parameters that are stored in a profile are the same as those listed under the &F command, except
for the parameters of the following commands that are not stored: +CMOD, +CSCA, +CSMP.
5.2.1.2 &Y Select power-up configuration
Command
Description
Set
&Y[0]
Power-up uses profile 0
&Y1
Power-up uses profile 1
The &Y command defines the profile from which parameters are loaded when the Nokia 22 is
activated. This setting is not part of the settings that are stored in a profile. The &F command does
not affect this setting.
activated. This setting is not part of the settings that are stored in a profile. The &F command does
not affect this setting.