Nokia 702 ユーザーズマニュアル

See also the language settings in "General" on page 103.

—When active, the code is requested 

each time the device is switched on. Deactivating the 
personal identification number (PIN) code request may not 
be allowed by some SIM cards. See "Glossary of PIN and 
lock codes" on page 110.

, 

, and 

—You can change the 

lock code, PIN code, and PIN2 code. These codes can only 
include the numbers from 0—9. See "Glossary of PIN and 
lock codes" on page 110.

Avoid using access codes similar to the emergency 
numbers to prevent accidental dialling of the emergency 
number.

If you forget any of these codes, contact your service 
provider.

—You can set an autolock period, a time-

out after which the device automatically locks and can be 
used only if the correct lock code is entered. Enter a 
number for the time-out in minutes, or select 

 to 

turn off the autolock period.

To unlock the device, enter the lock code.

Note: When the device is locked, calls in 
offline profile to certain emergency numbers 
programmed into the device are still possible. 
In this situation, calls to 110, 118 and 119 may 
not be possible depending on your USIM card. 
In that case, please set this option off and 
make calls with these numbers in accordance 
with "Emergency calls" on page 148.

Tip: To lock the device manually, press 

. A list 

of commands opens. Select 

.

Lock if SIM changed—You can set the phone to ask for 
the lock code when an unknown SIM card is inserted into 
the device. The device maintains a list of SIM cards that 
are recognised as the owner’s cards.