Uniden XS1455/1455+1 ユーザーズマニュアル

36

The ring time setting allows you to set the number of rings the caller hears before your answering machine plays the 
outgoing message. You can set the ring time to answer after six, nine or twelve rings. If you select Toll Saver [ 

 ],  

the answering machine picks up after six rings if you have new messages, and after nine rings if there are none. This 
way, if you make a long distance call to check your messages, you can hang up after the seventh ring to avoid billing 
charges.

To set the ring time, perform the following steps:
)  With the phone in standby, press [menu/clock] three times. You hear "Ring time" and the current ring time ( [ ],  

[   ], [ 

 ], [ 

 ] Toll saver), and it is displayed on the base. Then you hear the guidance for setting the ring 

time.

2)  Press [vol/select/ ] or [vol/select/ ] until the desired ring time appears.
3)  Press [set] to select the new ring time. You hear a confirmation tone, then the announcement "Ring time" 

followed by the new ring time. After a few seconds, the system announces "To set record time, press menu 
again."

You have three record time options: one minute, four minutes, and "Announce only."
"Announce only" answers the call with the preset greeting or your personal greeting but prevents the caller from 
leaving a message.

To set the record time, perform the following steps:
)  With the phone in standby, press [menu/clock] four times. You hear "Record time" and the current recording 

time ([   ]  minute, [   ] 4 minutes, [   ] Announce only, No recording), and it is displayed on the base. Then you 
hear the guidance for setting the record time.

XS1455+1 OM.indd   36

24/6/08   1:36:32 PM