Uniden DSS8955+2 ユーザーズマニュアル

13

14

Place the mounting 

slots over the pins 

on the wall plate.

Slide the base 

down to lock it 

into place.

At the bottom of the base, lift up on 

the release latch between the two 

bottom tabs and push the bracket up.

(To AC outlet)

Release latch

Note:  Mounting the phone directly on the wall

Be sure the wall is capable of supporting the weight of 

 

•

the phone, and use the proper type of anchoring device 

for the wall material.

Insert two #10 screws (minimum length of 35mm, not 

 

•

supplied) into the wall, 100mm apart.  

Leave the screw heads 3mm away from the wall to 

 

•

allow room for mounting the phone. 

Align the mounting slots over the screws and slide the 

 

•

base down into place as shown above.

DSS8955 OM.indb   14

28/7/08   5:20:44 PM