Vertical Communications EP100 ユーザーズマニュアル

Making Calls

Comdial

Sept ‘04

3.2 Making Intercom Calls

There are two methods for making an intercom call. One causes the
called telephone to ring (tone-first). The other causes your voice to
sound out at the called telephone (voice-first). Your installer can set
the system to deliver either tone-first or voice-first calling.

Note: The following instructions assume a tone-first setting. You can
change a call to voice announce signaling for that call simply by
pressing the INTERCOM button again after dialing the extension
number or by pressing the DSS/BLF button again.

To manually cause the other telephone
to ring (tone calling),

1. Press INTERCOM.
2. Dial extension number (called

telephone will ring).

To tone call automatically, press DSS/
BLF button (called telephone will ring).

Note: The following instructions assume a voice-first default setting.
Any user can change a call to a tone signaling for that call simply by
pressing the INTERCOM button again after dialing the extension
number or by pressing the DSS/BLF button again.

To voice announce manually,

1. Press INTERCOM.
2. Dial extension number.
3. Speak your announcement.

To voice announce automatically,

1. Press DSS/BLF button.
2. Speak your announcement.

Ext 321 J Doe

Press Intercom to Display

Extension Number

Calling J Smith

CALLBK

MSG

Ringing Intercom