AT&T DS1/DMi/ISDN-PRI ユーザーズマニュアル

ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2

7-71

This procedure is used to translate Codeset Mapping parameters. Figure 7-32,  Procedure 280

Word 1: ISDN-PRI Receive/Transmit Codeset Mapping (Generic 2),  depicts this procedure.

ENHANCED MODE - PROCEDURE:  280, WORD:  1

ISDN CODESET MAPPING

1.

2.

Codeset Map Number:

Incoming/Outgoing:

MAPPED FROM CODESET/INFORMATION ELEMENT

3.

4 .

Codeset:

IE Opcode:

MAPPED TO CODESET/INFORMATION ELEMENT

5.

6 .

Codeset:

IE Opcode:

DISPLAY ONLY

7. Available Map Number Mappings:

Connected to CC0 ON-LINE

enter command:

Figure 7-32.  Procedure 280 Word 1: ISDN-PRI Receive/Transmit Codeset Mapping (Generic 2)

Assigns a codset map number (such as defined in procedure 262, word 3). Field
encodes and their descriptions are:

●

Dash 

(–), 

which disables codeset mapping.

●

Any number between 0 and 15 that is previously defined with procedure 262,
word 3.

Specifies whether codeset mapping is for incoming messages or outgoing messages.
Field encodes and their descriptions are:

0

Assigns mapping for incoming messages.

1

Assigns mapping for outgoing messages.

From a Generic 2 perspective, incoming means mapped from Codeset 6 to
Codeset 7. While outgoing means Codeset 6 is mapped to Codeset 7. Two-way
trunk groups will normally have a Codeset Map translated for both incoming and
outgoing.