AT&T TL74408 ユーザーズマニュアル

Answering system setup

Number of rings
You can set the answering system to answer an 
incoming call after two, four, or six rings. You 
can also select toll saver, which is explained 
below. Unless you change it, the answering 
system answers an incoming call after four rings. 
To set the number of rings:
1. Press 

SETUP. The system will announce 

"Number of rings," followed by the current 
setting, and then "To change the setting, 
press 

SETUP."

2. Press 

SKIP or  REPEAT to change to two, 

four, or six rings, or toll saver. 

•  Toll saver - the answering system answers 

a call after two rings when there are new 
messages, and after four rings when there 
are no new messages. This allows you to 
check for new messages without paying 
for a toll call.

3. Press 

SETUP to save your selection and move 

to the next menu option. 

 

  Press 

 

STOP to save your selection 

and exit the menu. 

NOTE: If you subscribe to caller ID/call waiting and 
voicemail service through your telephone service 
provider, you can use your telephone answering system 
and voicemail together. Set your answering system to 
answer calls at least two rings earlier than your 
voicemail is set to answer. For example, set your 
voicemail to answer calls after six rings and set you 
answering system to answer after four rings. By doing 
this, if you are on a call, or if the answering system is 
busy recording a message and you receive another 
call, the second caller can leave a voicemail message.

56

Answering system operation