AT&T 1070 ユーザーズマニュアル

12

Table/desktop installation

2. 

Connect the power adapter to the telephone. Plug the small end of the 
power adapter into the jack labeled 

POWER on the back of the phone. 

Plug the large end into a standard electrical outlet not controlled by a wall 
switch.

Use only the power adapter provided with this product. To obtain a 

replacement, visit our website at 

 or call  

. In Canada, dial 

.

1.  The phone runs through initialization any time it is reconnected to AC 

power if a working battery is not installed (for example, after a power 
failure or when the unit has been unplugged). See page 84, 

spare battery.

2. Connect power to each telephone sequentially so that each set is 

assigned a unique extension number. If all sets are powered up at the 
same time, the same extension numbers could be assigned to more 
than one set. Please see page 32 for information on assigning extension 
numbers.

C: Four one-line wall jacks with one 2-line adapter using the 
telephone 

AUX jacks.

In this installation, four-conductor telephone line cord (RJ 14) is gray. 
The long cords supplied with the phone are four-conductor cords.

Two-line adapter

Power adapter

Electrical outlet not 
controlled by a wall 
switch

Line 1

Line 2

Line 3

Line 4