AT&T 1987 AT&T ユーザーズマニュアル

terminations on the rightmost two columns of buttons of the inactive console. Ringers
disabled on an inactive console will be enabled on the active console for those trunks with
dual appearances (appearances on both consoles).

All other features on all buttons,

including those on the associated Attendant Direct Extension Selector Console will continue
to function normally even though the console is inactive.

A DTAC cannot operate in the same system with a SLAC.

Refer to the Attendant Feature descriptions for information on other related features as
listed in Table 2-E.

System:

● 

Assign Primary and Secondary Attendant Positions (Vi)

● 

Display attendant position number (first or second) (V2)

● 

Assign number of rings before unanswered calls return to the Attendant Positional-

31) -Default = 5 rings

● 

Send DID calls to unassigned numbers to the Attendant Position (Yes, No) -Default

= Yes

● 

Send calls to Floating Personal Dial Codes that are not logged-in to the Attendant

Position (Yes, No) -Default = Yes

● 

Assign number of seconds before an unanswered Camped-On Call returns to the

Attendant Console (1-120 seconds), or No Attendant Camp-On (0) - Default = 30
seconds.

Attendant Console: (Station Port)

● 

Voice terminal type = 309 (V2)

● 

Special Programmable Buttons:

— Night Service

— Position Busy

— Attendant Message Waiting (assigned by default).

Note:  The following buttons are predefined on the Attendant Console and are

not administrable:

Alarm

— Return-On-Don’t-Answer

— Return-On-Busy

— Start

–  Cancel

2-15