Mitsubishi Electronics WS-55905 ユーザーズマニュアル
73
Problem
Possible Solution
• The TV remote control doesn't work
• Check that the batteries are installed correctly.
• Check that the select switch is set to "TV".
• Be no more than 20 feet from the TV when using
• Check that the select switch is set to "TV".
• Be no more than 20 feet from the TV when using
the remote control.
• The TV takes several seconds to respond
to channel commands
to channel commands
• Press ENTER after a channel number to avoid delays.
• Use the three digit number, i.e. 002 for channel 2.
• Use the three digit number, i.e. 002 for channel 2.
• You can't access a channel
• Use number keys instead of CHANNEL up/down
• Be sure the channel you want to view is in memory.
• Check that the TV is tuned to the correct input source
for that channel, by pressing the INPUT button.
• Make sure the V-chip lock is off (page 44).
• Be sure the channel you want to view is in memory.
• Check that the TV is tuned to the correct input source
for that channel, by pressing the INPUT button.
• Make sure the V-chip lock is off (page 44).
• On-screen displays appear each time
you change a function
you change a function
• This is part of normal TV operation.
• You can't program the TV to turn on automatically
• The TV may be locked.
• Clock is not set..
• Clock is not set..
• There's no sound even when the volume is turned up
• Check to see if the MUTE button is on.
• The TV's "Listen to:" setting may be set to SAP
• Check that "TV Speakers" setting is ON.
• The TV's "Listen to:" setting may be set to SAP
• Check that "TV Speakers" setting is ON.
• You forget your parent lock passcode
• See "Bypassing the Parent Lock, Appendix 3", page 81
• PIP does not display a picture
• Make sure the V-chip lock is off.
• Not all inputs can be displayed as a PIP. See page 60
for exceptions.
• Not all inputs can be displayed as a PIP. See page 60
for exceptions.
• The sound doesn't match the screen picture
• The TV's "Listen to:" setting may be set to SAP
• There is a large black or gray rectangle on the screen
• The TV closed captioning has been set to "text" mode,
but there is no text information being broadcast.
Turn Off in the CAPTION menu (page 36).
but there is no text information being broadcast.
Turn Off in the CAPTION menu (page 36).
• You cannot see a picture when you play a VCR tape
• If you connected your VCR with A/V cables, use the INPUT
button to select the Input source (INPUT-1 or 2) that the
VCR is connected to.
• Make sure Video Mute is turned off.
button to select the Input source (INPUT-1 or 2) that the
VCR is connected to.
• Make sure Video Mute is turned off.
• If you have previously been using an HD-1080, turn off the
power, unplug the set and then plug in and power on TV.
• Make sure you have connected the HDTV receiver correctly.
See connections section in this guide and the HDTV owner's
guide.
power, unplug the set and then plug in and power on TV.
• Make sure you have connected the HDTV receiver correctly.
See connections section in this guide and the HDTV owner's
guide.
• If using stereo or AV receiver speakers, check input
selection on the stereo or AV receiver.
• If using stereo or AV receiver, check that AUDIO is from
MONITOR OUTPUT on TV's back panel.
selection on the stereo or AV receiver.
• If using stereo or AV receiver, check that AUDIO is from
MONITOR OUTPUT on TV's back panel.
• Cannot see a picture when using a non-HD-1080
receiver
receiver
Troubleshooting