Mitsubishi Electronics HC7000 ユーザーズマニュアル

Lens shift right-left motor drive

Lens shift up-down motor drive

Focus motor

Zoom motor

An inorganic liquid crystal panel is incorporated, creating deep rich blacks and eliminating the need for the rubbing 

process. This realizes the reproduction of vivid high-definition images with no vertical lines. The rate panel service life

is approximately tenfold that of organic film panels, translating into years of high picture quality viewing enjoyment. 

The HC7000 has two HDMI input terminals, and is capable 

of processing high-contrast images from 10- and 12-bit 

video signals in addition to the conventional 8-bit signal. 

Using the 100-type size (16:9) enables not only the adjustment of projection

distance from 3.1m to 5.0m, but also brilliant crystal-clear images in tight spots 

where sufficient distance to the screen cannot be kept. With a vertical lens shift 

range of 75% and horizontal range of 5%, installation is simple and easy. Two-stage 

adjustment, quick and fine, has been added to the power drive to enhance usability. 

The anamorphic lens compatibility of the HC7000 widens the projection range of cinema-scope images. Mode 1 proves extended 

projection, and Mode 2 is for images other than cinema-scope, which mirror the original with the anamorphic lens attached.   

Successor to the REALTA IC manufactured by Silicon Optics Inc., renowned for its IC solutions that deliver Hollywood Quality
Video (HQV), this high-quality chip is the key to improved image reproduction. 

Precise and accurate rendering is what you get with Mitsubishi’s 10-bit interlace/progressive (I/P) conversion image processing 
technology. Be it terrestrial digital, broadcast satellite movies, mixed video sources or even commercially packaged media,
the end result is always the progressive reproduction of high picture quality. 

This ultra-precise image scaling function guarantees superior pixel conversion processing when converting resolution up from 
720x480p to 1920x1080p. A unique filtering technique enables adaptive switching to a total of 
1024 filter tabs each horizontally and vertically, further contributing to the high-definition picture 
quality of the images. Our Fixed Film/Video Mode greatly improves conversion precision. 

Mitsubishi’s original 14-bit gamma correction processing function expands gradation expression 
power 16-fold over the conventional 10-bit technology. This dramatically raises
the projector’s ability to reproduce the subtleties in dark images.

    2-3 Pulldown 

When processing
24 frames/sec images at 
60 frames/sec, smooth 
motion becomes distorted 
because the signals in the 
2- and 3-frame sequences 
cause overflow into the 
third B-frame.

    24P Direct Output 

With a signal processing 
speed of 24 frames/sec 
increased to 48 frames/sec, 
the sequence created 
aligns the signal, providing 
a smoothness and
textured detail that mirror 
the original.

The HC7000 is compatible with Blu-ray 24P direct output. Thanks to an output of up to 48P (96Hz liquid crystal panel driver), twice the speed of 

conventional movie signals (24 frames/sec), unbelievably life-like images are reproduced with a smoothness and texture detail that mirror the original. 

The HC7000 is equipped with
a projector power switch/screen 
extension/retraction trigger 
combination, creating a convenient
one-touch operation function
for cinema viewing.
An anamorphic mode is also 
incorporated. 

The projection lamp has a long 5000-hour
service life for months of uninterrupted viewing 
pleasure. When its time to clean or replace to 
lamp, a side-loading installation design makes it 
so the projector does not need to be moved.
So regardless of installation–whether suspended 
from the ceiling or sitting on a shelf–lamp 
maintenance and replacement is simple and easy. 

The button on the remote controller 
illuminate automatically, promising easy, 
trouble-free operation even in the darkest
of rooms. Convenience is also improved 
with a function that enables the screen to 
be adjusted directly from the remote 
controller.

The HC7000 comes with an air
filter that has a three-dimensional
honeycomb structure,
a microscopic filtering surface
and a special electrostatic film
for enhanced filtering efficiency.
It attaches to the side of the projector 
and works as an air purification 
system to prevent dirt and other
air-borne particulates from entering 
the chassis.

    Anamorphic Mode 1

    Anamorphic Mode 2

Original Image

Anamorphic Mode 1

Cinema-scope screen

Original Image(16:9)

An expanded Image

Anamorphic Mode 2

1080

1080

1080