Mitsubishi Electronics WD-52627 ユーザーズマニュアル

1.  Insert a card into a matching card slot on the front of 

the TV.  Be sure to use the correct card slot.
•  Card 1 accepts SmartMedia™.
•  Card 2 accepts MultiMediaCard™ and SD Media 

Card.

 

Card 3 accepts CompactFlash® and 
MicroDrive®.

•  Card 4 accepts MEMORY STICK™ and Memory 

Stick Pro.  Cards up to 1GB, with a file format of 
FAT 16 (block size = 1024 or 2048) are supported.

Normally the label side should be up, but if the card 
does not fit, try turning the card over and insert again.  
When properly inserted, the light next to the slot 
lights up.

2.  Press DEVICE on the remote control to display the 

Device Selection Menu and then select the correct 
card slot from the list, using ADJUST          .

3.  The Media Dialog box (figure 2) will automatically 

display.  Use the AUDIO button to switch from JPEG 
Picture Slide show setup to MP3 or WMA7 Audio Play 
list setup or use the VIDEO button on the remote to 
switch from the MP3 or WMA Audio Play list setup to 
JPEG Picture Slide show setup.

4.  On the remote control, press:

PLAY: 

to start the slide show or play audio.

GUIDE:  to display the JPEG Thumbnail menu (Figure 3) 

or Audio track play list (Figure 4)

DEVICE
MENU:  to display the Media Setup menu (Figure 5).

For JPEG Pictures Slide show:
PLAY: 

begins or resumes slide show playback

PAUSE: 

pauses or resumes playback while in the 
automatic advance mode.

FF:  

skips to the next slide.

REW: 

returns to the previous slide.

FORMAT:  single press rotates the slide 90˚.  Multiple 

presses continue to rotate the slide.

STOP: 

Stop slide show, return to media card screen.

For MP3 or WMA Audio Playback
PLAY: 

begins or resumes play list playback.

PAUSE:  

pauses or resumes playback.

FF: 

skips to the next track/song.

REW: 

skips to the previous track/song.

STOP: 

Stop playback and returns to media card 
screen.

1.  Press GUIDE on the remote to display the JPEG 

picture Thumbnail menu.

2.  Press ADJUST          to move the highlight to 

different images (CH up/down will change pages of 

the Thumbnail menu). Use REW to go to the first slide 

and FF to go to the last slide on the page.

3.  Press FORMAT to rotate the selected image 90˚ 

(pressing FORMAT four times will rotate the image 
completely around to the original position).

4.  Press PLAY to begin playback of the Slide show from 

the selected image.  The Thumbnail menu will be 
taken down.